ASME A112.19.19-2006 pdf free download.Vitreous China Nonwater Urinals
3 GENERAL REQUIREMENTS
3.1 Alternate Material Components When alternate materials are used as components within a nonwater urinal, the assembly shall conform to applicable material standards for the plumbing application. Theyshall satisfythis Standard regardingquality, strength, effectiveness, durability, and safety. They shall also be repairable or replaceable within the vitreous china fixture.
3.2 Alternate Materials in Trapways Where alternate materials are used in a nonwater uri- nal trapway, the trapway shall comply with the require- ments of the auger test specified in para. 5.5.
3.3 Nonstandard Outlet Configurations — Joint Seal Test When an outlet configuration requires a connection other than a urinal flange, this connection shall not leak when tested in accordance with para. 5.7 and shall be of a design that allows for field repair or replacement.
3.4 Load Tests for Wall-Mounted Fixtures
3.4.1 Load Test for Urinals. All wallmounted, non- water urinals shall withstand a load of 50 lbf (0.22 kN) when tested in accordance with para. 5.6.
3.4.2 Off-the-Floor Fixture Supports. Fixture sup- ports, when required, shall comply with ASME A112.6.1M, ASME A112.6.2, or ASME A112.19.12.
3.5 Tolerances and Dimensions For tolerance and dimension information, reference ASME A112.19.2, para. 3.1.
3.6 Connection to the Drainage System 3.6.1 Nonwater urinals shall have an integral or removable trap with a liquid seal and an outlet assembly for connection to the drainage system. The outlet spud size shall be a minimum of 1 1 ⁄ 2 in. (38 mm) in diameter. 3.7 Urinal Dimensions Minimum urinal dimensions shall be as specified in Table 2.
4 MARKINGS AND INSTALLATION INSTRUCTIONS
4.1 Permanent Markings on Product Each fixture meeting this Standard shall be permanently marked as required by this section. Where the fixture is comprised of two or more components, each fixture component that is visible after installation of the fixture shall be permanently marked as required by this section. Acceptable means ofapplying permanentmarkings shall include fired on, etching, sand blasting, stampingwith a permanent (nonwatersoluble) ink, and cast-inmarkings. Adhesive labelsthatcomplywithUL 969 shall also be considered permanent. The exposure conditions contained in para. 7.1 of UL 969 shall apply, along with the additional exposure to the detergent test specified in Table 7.4 of UL 969.
4.1.1 Manufacturer’s Name. The manufacturer’s name or registered trademark or, in the case of private labeling, the name of the customer for whom the fixture was manufactured shall be applied so as to be legible, readily identified, and located so as to be visible after installation.
4.1.2 Model Number. The model number of the nonwater urinal shall be applied so as to be legible.
4.1.3 Date ofManufacture. The date of manufacture (casting date) shall be applied so as to be legible.
4.2 Marking Requirements for Product Packaging All packaging for vitreous china nonwater urinals shall be marked with the manufacturer’s name or registered trademark or, in the case of private labeling, the name of the customer for whom the fixture was manufactured and the model number of the fixture.
4.3 Installation Instructions The manufacturer shall provide installation instructions with the nonwater urinals. Installation instructions shall include care and maintenance information.
4.4 Repair Parts The manufacturer shall supply information to enable the end user to specifyand obtainrepairparts fornormal maintenance.
5 VITREOUS CHINA AND ALTERNATE MATERIALS TESTS
5.1 Absorption (Boiling) Test For absorption (boiling) test criteria, reference ASME A112.19.2, para. 7.1.
5.2 Crazing Test For crazing test criteria, reference ASME A112.19.2, para. 7.2. 5.3 Warpage Test For warpage test criteria, reference ASME A112.19.2, para. 7.3 (see also para. 2.4). 5.4 Evaluation of Surface Finish For surface finish criteria, reference ASME A112.19.2, para. 7.4 (see also para. 2.6).ASME A112.19.19 pdf download.ASME A112.19.19-2006 pdf free download
